Original file

Mercedes-Benz Bosch MD1CP001 0265490200 / 10SW053619

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, hardware number 0265490200 and software number 10SW053619, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benzdiesel 190PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW053619
Software / calibration
6549027500

Technical data

Vehicle
BrandMercedes-Benz
Enginediesel 190PS
Displacement2.0
Power190.3PS / 140.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW053619
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file name389
File key71bc54a3aeefdc79
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW053619Offset in the file: 0x000144
Software / calibration6549027500Offset in the file: 0x4A262F
Data set number6549037304Offset in the file: 0x71906B
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C072D///Offset in the file: 0x4A2640

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW053619. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz VFlash8,192.00 KB€20Add to cart
Mercedes-Benz V-KlasseFlash8,192.00 KB€20Add to cart
Mercedes-Benz V-KlasseFlash8,192.00 KB€20Add to cart
Mercedes-Benz V ClassFlash8,192.00 KB€20Add to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz V-KlasseFlash8,192.00 KB€20Add to cart

All reads of 0265490200 / 10SW053619

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW047382Mercedes-Benz Benz E 220D MD1CP001
026549020010SW048227Mercedes-Benz V-classe, Mercedes-Benz V
026549020010SW050963Mercedes-Benz GLE
026549020010SW053213Mercedes-Benz E220, Mercedes-Benz E
026549020010SW054612Mercedes-Benz E400
026549020010SW054679Mercedes-Benz E
026549020010SW054910Mercedes-Benz A160, Mercedes-Benz G400d, Mercedes-Benz GLE350
02654902006549011600Mercedes-Benz E220d, Mercedes-Benz C200d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page