Original file

Mercedes-Benz E400 Bosch MD1CP001 0265490200 / 10SW054612

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E400, hardware number 0265490200 and software number 10SW054612, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E4003.0 diesel 340PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW054612
Software / calibration
6549028200

Technical data

Vehicle
BrandMercedes-Benz
Car modelE400
Engine3.0 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW054612
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file name353
File key7fa3093a3f87c38e
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW054612Offset in the file: 0x000144
Software / calibration6549028200Offset in the file: 0x49CE77
Data set number6569036203Offset in the file: 0x7109FB
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A091D///Offset in the file: 0x49CE88

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW054612. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW048227Mercedes-Benz V-classe, Mercedes-Benz V
026549020010SW050963Mercedes-Benz GLE
026549020010SW053213Mercedes-Benz E220, Mercedes-Benz E
026549020010SW053619Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class
026549020010SW054679Mercedes-Benz E
026549020010SW054910Mercedes-Benz A160, Mercedes-Benz G400d, Mercedes-Benz GLE350
02654902006549011600Mercedes-Benz E220d, Mercedes-Benz C200d
02654902006549012200Mercedes-Benz Vito

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page