Original file

Mercedes-Benz E220 220D Bosch MD1CP001 0265490200 / 6549023600 - 6549032604

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E220 220D, hardware number 0265490200 and software number 6549023600 - 6549032604, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E220 220D194.0PS / 142.7kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6549023600 - 6549032604
Bosch part / software
10SW032157
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelE220 220D
Engine194.0PS / 142.7kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6549023600 - 6549032604
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key7a42c1a4f55d680f
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW032157Offset in the file: 0x000144
Software / calibration6549023600Offset in the file: 0x499DFF
Data set number6549032604Offset in the file: 0x71054F
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x499E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6549023600 - 6549032604. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006549022500Mercedes-Benz E220d, Mercedes-Benz E220
02654902006549022500 - 6549035201Mercedes-Benz E200 200d
02654902006549022800 - 6569035000Mercedes-Benz CLS400 400D
02654902006549023600Mercedes-Benz C220d, Mercedes-Benz C180d, Mercedes-Benz C300d
02654902006549023600 - 6549035602Mercedes-Benz C200 2.0 CDI R4
02654902006549024100Mercedes-Benz Vito, Mercedes-Benz V-classe
02654902006549025200Mercedes-Benz GLE220d, Mercedes-Benz GLC220d, Mercedes-Benz CLA200
02654902006549027500Mercedes-Benz A200d, Mercedes-Benz Vito, Mercedes-Benz V-classe

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page