Original file

Mercedes-Benz Vito 250 CDI Bosch MD1CP001 0265490200 / 6549036904

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz Vito 250 CDI, hardware number 0265490200 and software number 6549036904, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito 250 CDIdiesel 190.0PS / 139.7kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6549036904
Bosch part / software
10SW048227
Software / calibration
6549024100

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito 250 CDI
Enginediesel 190.0PS / 139.7kW
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6549036904
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key6844b4869cd757dc
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW048227Offset in the file: 0x000144
Software / calibration6549024100Offset in the file: 0x4A2527
Data set number6549036904Offset in the file: 0x71906B
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C060D///Offset in the file: 0x4A2538

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6549036904. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006549032405Mercedes-Benz E220d 2.0d
02654902006549034807Mercedes-Benz C 180 D
02654902006549035702Mercedes-Benz E200 2.0
02654902006549036601Mercedes-Benz E200d 2.0d
02654902006549037404Mercedes-Benz Vito 124 CDI
02654902006549037804Mercedes-Benz V 300 D
02654902006549041300Mercedes-Benz GLE400d, Mercedes-Benz S350d, Mercedes-Benz S350
02654902006569010200Mercedes-Benz E400, Mercedes-Benz E400d 3.0d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page