Original file

Mercedes-Benz V 300 D Bosch MD1CP001 0265490200 / 6549037804

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz V 300 D, hardware number 0265490200 and software number 6549037804, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V 300 D240.0PS / 176.5kW
Control unit
Bosch MD1CP001
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6549037804
Bosch part / software
10SW027171
Software / calibration
6549027500

Technical data

Vehicle
BrandMercedes-Benz
Car modelV 300 D
Engine240.0PS / 176.5kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6549037804
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File key14f5b34d06cdb26a
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW027171Offset in the file: 0x000164
Software / calibration6549027500Offset in the file: 0x4E262F
Data set number6549037804Offset in the file: 0x75906B
Boot software6549041300Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C072D///Offset in the file: 0x4E2640

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6549037804. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006549035702Mercedes-Benz E200 2.0
02654902006549036601Mercedes-Benz E200d 2.0d
02654902006549036904Mercedes-Benz Vito 250 CDI
02654902006549037404Mercedes-Benz Vito 124 CDI
02654902006549041300Mercedes-Benz GLE400d, Mercedes-Benz S350d, Mercedes-Benz S350
02654902006569010200Mercedes-Benz E400, Mercedes-Benz E400d 3.0d
02654902006569010900Mercedes-Benz S400d 3.0d
02654902006569031901Mercedes-Benz CLS 350 D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page