Original file

Mercedes-Benz CLS 350 D Bosch MD1CP001 0265490200 / 6569031901

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS 350 D, hardware number 0265490200 and software number 6569031901, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS 350 D286PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6569031901
Bosch part / software
10SW034695
Software / calibration
6549023700

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS 350 D
Engine286PS
FuelDiesel
Displacement3.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6569031901
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key1210ab0c2591bbfb
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW034695Offset in the file: 0x000144
Software / calibration6549023700Offset in the file: 0x49A637
Data set number6569031901Offset in the file: 0x710697
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A060D///Offset in the file: 0x49A648

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6569031901. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006549037804Mercedes-Benz V 300 D
02654902006549041300Mercedes-Benz GLE400d, Mercedes-Benz S350d, Mercedes-Benz S350
02654902006569010200Mercedes-Benz E400, Mercedes-Benz E400d 3.0d
02654902006569010900Mercedes-Benz S400d 3.0d
02654902006569032001Mercedes-Benz E 350 d
02654902006569034503Mercedes-Benz G 400 D
02654902006569034602Mercedes-Benz GLE 350 D
02654902006569035601Mercedes-Benz G 400 d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page