Original file

Mercedes-Benz G 400 D Bosch MD1CP001 0265490200 / 6569034503

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz G 400 D, hardware number 0265490200 and software number 6569034503, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G 400 D330PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6569034503
Bosch part / software
10SW039898
Software / calibration
6549025200

Technical data

Vehicle
BrandMercedes-Benz
Car modelG 400 D
Engine330PS
FuelDiesel
Displacement3.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6569034503
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key8f5234c2f0462f4e
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW039898Offset in the file: 0x000144
Software / calibration6549025200Offset in the file: 0x4A0137
Data set number6569034503Offset in the file: 0x71908F
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x4A0148

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6569034503. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006569010200Mercedes-Benz E400, Mercedes-Benz E400d 3.0d
02654902006569010900Mercedes-Benz S400d 3.0d
02654902006569031901Mercedes-Benz CLS 350 D
02654902006569032001Mercedes-Benz E 350 d
02654902006569034602Mercedes-Benz GLE 350 D
02654902006569035601Mercedes-Benz G 400 d
028103349010SW002363Mercedes-Benz C220
028103375110SW029530Mercedes-Benz S400

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page