Original file

Mercedes-Benz GLE 350 D Bosch MD1CP001 0265490200 / 6569034602

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLE 350 D, hardware number 0265490200 and software number 6569034602, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE 350 D272.0PS / 200.1kW
Control unit
Bosch MD1CP001
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
6569034602
Bosch part / software
10SW027171
Software / calibration
6549027600

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE 350 D
Engine272.0PS / 200.1kW
FuelDiesel
Displacement3.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number6569034602
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File keyd5c32c659fac4518
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW027171Offset in the file: 0x000164
Software / calibration6549027600Offset in the file: 0x4E0497
Data set number6569034602Offset in the file: 0x759297
Boot software6549041300Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B082D///Offset in the file: 0x4E04A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 6569034602. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006569010900Mercedes-Benz S400d 3.0d
02654902006569031901Mercedes-Benz CLS 350 D
02654902006569032001Mercedes-Benz E 350 d
02654902006569034503Mercedes-Benz G 400 D
02654902006569035601Mercedes-Benz G 400 d
028103349010SW002363Mercedes-Benz C220
028103375110SW029530Mercedes-Benz S400
028103375110SW047168Mercedes-Benz CLS

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page