Original file

Mercedes-Benz C220 Bosch MD1CP001 0281033490 / 10SW002363

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz C220, hardware number 0281033490 and software number 10SW002363, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2202.0 190PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0281033490
Software number
10SW002363
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelC220
Engine2.0 190PS
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0281033490
Software number10SW002363
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key4fc3323568e5b7a2
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002363Offset in the file: 0x040164
Software / calibration6549023600Offset in the file: 0x519DFF
Data set number6549037901Offset in the file: 0x79054F
Boot software6569040000Offset in the file: 0x0586D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x519E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281033490 and software number 10SW002363. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006569032001Mercedes-Benz E 350 d
02654902006569034503Mercedes-Benz G 400 D
02654902006569034602Mercedes-Benz GLE 350 D
02654902006569035601Mercedes-Benz G 400 d
028103375110SW029530Mercedes-Benz S400
028103375110SW047168Mercedes-Benz CLS
1J2B3E310SW066192Mercedes-Benz V-Klasse
654901160010SW032157Mercedes-Benz W205

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page