Original file

Mercedes-Benz CLS Bosch MD1CP001 0281033751 / 10SW047168

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS, hardware number 0281033751 and software number 10SW047168, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLSdiesel 285PS
Control unit
Bosch MD1CP001
File size
7,680.00 KB
Contents
Flash
Hardware number
0281033751
Software number
10SW047168

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS
Enginediesel 285PS
Displacement2.9
Power285.0PS / 209.6kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0281033751
Software number10SW047168
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File key153c3d2e004a3219
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW047168Offset in the file: 0x600144
Data set number6569031901Offset in the file: 0x710697
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A060D///Offset in the file: 0x77FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281033751 and software number 10SW047168. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006569034602Mercedes-Benz GLE 350 D
02654902006569035601Mercedes-Benz G 400 d
028103349010SW002363Mercedes-Benz C220
028103375110SW029530Mercedes-Benz S400
1J2B3E310SW066192Mercedes-Benz V-Klasse
654901160010SW032157Mercedes-Benz W205
654901160010SW033448Mercedes-Benz C220
654901160010SW034574Mercedes-Benz E

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page