Original file

Mercedes-Benz E Bosch MD1CP001 10SW002242

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E, software number 10SW002242, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E1.9 diesel 194PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW002242
Software / calibration
6549021100

Technical data

Vehicle
BrandMercedes-Benz
Car modelE
Engine1.9 diesel 194PS
Power194.0PS / 142.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW002242
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file name61
File key07594ba492092474
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002242Offset in the file: 0x040144
Software / calibration6549021100Offset in the file: 0x40039F
Data set number6549037900Offset in the file: 0x70AEA7
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_5060D///Offset in the file: 0x4003B0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW002242. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-BenzFlash8,192.00 KB€20Add to cart
Mercedes-BenzFlash2,048.00 KB€20Add to cart
Mercedes-Benz EFlash8,192.00 KB€20Add to cart
Mercedes-Benz E220Flash8,192.00 KB€20Add to cart

All reads of 10SW002242

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
Mercedes-Benz V-KlasseMercedes-Benz V-Klasse
046851Mercedes-Benz A220
066186Mercedes-Benz Vito
080831Mercedes-Benz A200
10SW002519Mercedes-Benz E200
10SW002521Mercedes-Benz
10SW002559Mercedes-Benz E-Class
10SW002563Mercedes-Benz Benz E213 2016y 220D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page