Original file

Mercedes-Benz E-Class Bosch MD1CP001 10SW002559

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E-Class, software number 10SW002559, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E-Class1.9 diesel 194PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW002559
Software / calibration
6549021800

Technical data

Vehicle
BrandMercedes-Benz
Car modelE-Class
Engine1.9 diesel 194PS
Power194PS / 142.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW002559
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyfa0cb0c70ed1e88c
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002559Offset in the file: 0x040144
Software / calibration6549021800Offset in the file: 0x48701F
Data set number6549033001Offset in the file: 0x733375
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_7035D///Offset in the file: 0x487030

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW002559. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
080831Mercedes-Benz A200
10SW002242Mercedes-Benz E, Mercedes-Benz E220
10SW002519Mercedes-Benz E200
10SW002521Mercedes-Benz
10SW002563Mercedes-Benz Benz E213 2016y 220D
10SW002801Mercedes-Benz E200
10SW019732Mercedes-Benz E200
10SW019737Mercedes-Benz E

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page