Original file

Mercedes-Benz Benz E213 2016y 220D Bosch MD1CP001 10SW002563

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz Benz E213 2016y 220D, software number 10SW002563, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Benz E213 2016y 220D143KW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW002563
Bosch part / software
10SW002559
Software / calibration
6549021800

Technical data

Vehicle
BrandMercedes-Benz
Car modelBenz E213 2016y 220D
Engine143KW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW002563
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameMercedes Benz E213 220D MD1CP001
File key5b377cbac367e8cf
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002559Offset in the file: 0x040144
Software / calibration6549021800Offset in the file: 0x48701F
Data set number6549039400Offset in the file: 0x733375
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_7035D///Offset in the file: 0x487030

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW002563. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW002242Mercedes-Benz E, Mercedes-Benz E220
10SW002519Mercedes-Benz E200
10SW002521Mercedes-Benz
10SW002559Mercedes-Benz E-Class
10SW002801Mercedes-Benz E200
10SW019732Mercedes-Benz E200
10SW019737Mercedes-Benz E
10SW021370Mercedes-Benz E

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page