Original file

Mercedes-Benz Bosch MD1CP001 10SW032716

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, software number 10SW032716, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benzdiesel 149PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW032716
Software / calibration
6549023400

Technical data

Vehicle
BrandMercedes-Benz
Enginediesel 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW032716
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keydfe6c8ef2bad9b5d
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW032716Offset in the file: 0x040144
Software / calibration6549023400Offset in the file: 0x4CAB1F
Data set number6549034602Offset in the file: 0x74BCDF
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_9060D///Offset in the file: 0x4CAB30

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW032716. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW024842Mercedes-Benz CLS, Mercedes-Benz C200, Mercedes-Benz E220
10SW029842Mercedes-Benz CLS400
10SW029843Mercedes-Benz CLS350
10SW032157Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz C
10SW034695Mercedes-Benz CLS400, Mercedes-Benz CLS-Class, Mercedes-Benz S
10SW036368Mercedes-Benz CLS400d
10SW039898Mercedes-Benz GLE, Mercedes-Benz GLC220, Mercedes-Benz CLA
10SW044139Mercedes-Benz A W177 2018y 2.0D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page