Original file

Mercedes-Benz A W177 2018y 2.0D Bosch MD1CP001 10SW044139

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz A W177 2018y 2.0D, software number 10SW044139, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A W177 2018y 2.0D2.0 150HP
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Software number
10SW044139

Technical data

Vehicle
BrandMercedes-Benz
Car modelA W177 2018y 2.0D
Engine2.0 150HP
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW044139
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes W177 2018y 150HP MD1CP001
File keyc21a6816d5e243d7
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW044139Offset in the file: 0x000144
Data set number6549037303Offset in the file: 0x11908F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW044139. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW032716Mercedes-Benz
10SW034695Mercedes-Benz CLS400, Mercedes-Benz CLS-Class, Mercedes-Benz S
10SW036368Mercedes-Benz CLS400d
10SW039898Mercedes-Benz GLE, Mercedes-Benz GLC220, Mercedes-Benz CLA
10SW044830Mercedes-Benz C200
10SW046217Mercedes-Benz GLC220
10SW046850Mercedes-Benz
10SW047124Mercedes-Benz GLE

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page