Original file
Mercedes-Benz Benz Bosch MD1CP001 10SW047385
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz Benz, software number 10SW047385, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Benz2.0 194PS
- Control unit
- Bosch MD1CP001
- File size
- 7,680.00 KB
- Contents
- Flash
- Software number
- 10SW047385
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Benz |
| Engine | 2.0 194PS |
| Fuel | Diesel |
| Power | 194.0PS / 142.7kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW047385 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | 3fe5c7a82a485f08 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW047385 | Offset in the file: 0x600144 |
| Data set number | 6549031904 | Offset in the file: 0x71054F |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D/// | Offset in the file: 0x77FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW047385. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW044830 | Mercedes-Benz C200 | |
| 10SW046217 | Mercedes-Benz GLC220 | |
| 10SW046850 | Mercedes-Benz | |
| 10SW047124 | Mercedes-Benz GLE | |
| 10SW050467 | ||
| 10SW050468 | Mercedes-Benz | |
| 10SW050471 | Mercedes-Benz V | |
| 10SW050472 | Mercedes-Benz Viano |