Original file
Mercedes-Benz Bosch MD1CP001 10SW050963
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, software number 10SW050963, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz
- Control unit
- Bosch MD1CP001
- File size
- 8,192.00 KB
- Contents
- Flash
- Software number
- 10SW050963
- Software / calibration
- 6549027100
Technical data
| Brand | Mercedes-Benz |
|---|
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW050963 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | ffa2a9dd6c3d7eff |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW050963 | Offset in the file: 0x040144 |
| Software / calibration | 6549027100 | Offset in the file: 0x50AC87 |
| Data set number | 6549032905 | Offset in the file: 0x758B5B |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_D050D/// | Offset in the file: 0x50AC98 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW050963. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW050467 | ||
| 10SW050468 | Mercedes-Benz | |
| 10SW050471 | Mercedes-Benz V | |
| 10SW050472 | Mercedes-Benz Viano | |
| 10SW052619 | Mercedes-Benz C200 | |
| 10SW053180 | Mercedes-Benz V-Klasse | |
| 10SW053213 | Mercedes-Benz E | |
| 10SW053619 | Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class |