Original file

Mercedes-Benz C200 Bosch MD1CP001 10SW052619

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz C200, software number 10SW052619, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2001.6 diesel 122PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW052619
Software / calibration
6549027000

Technical data

Vehicle
BrandMercedes-Benz
Car modelC200
Engine1.6 diesel 122PS
Power122.0PS / 89.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW052619
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key07326bb9dc2ca3a8
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW052619Offset in the file: 0x040144
Software / calibration6549027000Offset in the file: 0x4E037F
Data set number6549035003Offset in the file: 0x75928F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B081D///Offset in the file: 0x4E0390

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW052619. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW050468Mercedes-Benz
10SW050471Mercedes-Benz V
10SW050472Mercedes-Benz Viano
10SW050963Mercedes-Benz
10SW053180Mercedes-Benz V-Klasse
10SW053213Mercedes-Benz E
10SW053619Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class
10SW054612Mercedes-Benz S, Mercedes-Benz E400D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page