Original file
Mercedes-Benz E Bosch MD1CP001 10SW053213
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E, software number 10SW053213, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Ediesel 150PS
- Control unit
- Bosch MD1CP001
- File size
- 8,192.00 KB
- Contents
- Flash
- Software number
- 10SW053213
- Software / calibration
- 6549027400
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E |
| Engine | diesel 150PS |
| Power | 150.0PS / 110.3kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW053213 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | eb57f73b22740573 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW053213 | Offset in the file: 0x040144 |
| Software / calibration | 6549027400 | Offset in the file: 0x4CBF8F |
| Data set number | 6549032712 | Offset in the file: 0x74BD07 |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_9070D/// | Offset in the file: 0x4CBFA0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW053213. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW050472 | Mercedes-Benz Viano | |
| 10SW050963 | Mercedes-Benz | |
| 10SW052619 | Mercedes-Benz C200 | |
| 10SW053180 | Mercedes-Benz V-Klasse | |
| 10SW053619 | Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class | |
| 10SW054612 | Mercedes-Benz S, Mercedes-Benz E400D | |
| 10SW054679 | Mercedes-Benz C200CDI | |
| 10SW054910 | Mercedes-Benz E, Mercedes-Benz G, Mercedes-Benz GLC |