Original file
Mercedes-Benz Bosch MD1CP001 10SW057581
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, software number 10SW057581, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz
- Control unit
- Bosch MD1CP001
- File size
- 8,192.00 KB
- Contents
- Flash
- Software number
- 10SW057581
- Software / calibration
- 6549027700
Technical data
| Brand | Mercedes-Benz |
|---|
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW057581 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | afbaad6bb349930e |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW057581 | Offset in the file: 0x040144 |
| Software / calibration | 6549027700 | Offset in the file: 0x50AECF |
| Data set number | 6549036306 | Offset in the file: 0x758BA3 |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_D060D/// | Offset in the file: 0x50AEE0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW057581. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW054910 | Mercedes-Benz E, Mercedes-Benz G, Mercedes-Benz GLC | |
| 10SW055769 | Mercedes-Benz GLA-Class | |
| 10SW056909 | Mercedes-Benz VITO119 | |
| 10SW056910 | Mercedes-Benz E / E Coupe | |
| 10SW058297 | Mercedes-Benz CLS220D | |
| 10SW066188 | Mercedes-Benz Vito | |
| 10SW066189 | Mercedes-Benz Vito | |
| 10SW066190 | Mercedes-Benz V-Klasse |