Original file

Mercedes-Benz V220d Bosch MD1CP001 10SW071442

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz V220d, software number 10SW071442, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V220dOM654
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Software number
10SW071442
Software / calibration
6549029403

Technical data

Vehicle
BrandMercedes-Benz
Car modelV220d
EngineOM654
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Software number10SW071442
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key25fcb9011dd983ba
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW071442Offset in the file: 0x080144
Software / calibration6549029403Offset in the file: 0x58FD8F
Data set number6549030307Offset in the file: 0x739EFF
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0V_F070D///Offset in the file: 0x58FDA0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW071442. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW066188Mercedes-Benz Vito
10SW066189Mercedes-Benz Vito
10SW066190Mercedes-Benz V-Klasse
10SW067701Mercedes-Benz CLA220d
10SW084622Mercedes-Benz G
10SW086739Mercedes-Benz Vito
10SW086741Mercedes-Benz Vito
10SW086743Mercedes-Benz V

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page