Original file

Mercedes-Benz V-Klasse Bosch MD1CP001 1J2B3E3 / 10SW066192

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz V-Klasse, hardware number 1J2B3E3 and software number 10SW066192, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V-Klasse2.1 diesel 163PS
Control unit
Bosch MD1CP001
File size
7,680.00 KB
Contents
Flash
Hardware number
1J2B3E3
Software number
10SW066192

Technical data

Vehicle
BrandMercedes-Benz
Car modelV-Klasse
Engine2.1 diesel 163PS
Power163.0PS / 119.9kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number1J2B3E3
Software number10SW066192
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File key5ddbc30dd3861973
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW066192Offset in the file: 0x600144
Data set number6549038106Offset in the file: 0x71906B
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C072D///Offset in the file: 0x77FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1J2B3E3 and software number 10SW066192. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
02654902006569035601Mercedes-Benz G 400 d
028103349010SW002363Mercedes-Benz C220
028103375110SW029530Mercedes-Benz S400
028103375110SW047168Mercedes-Benz CLS
654901160010SW032157Mercedes-Benz W205
654901160010SW033448Mercedes-Benz C220
654901160010SW034574Mercedes-Benz E
654901160010SW046212Mercedes-Benz GLC

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page