Original file

Mercedes-Benz E220d 2.0d Bosch MD1CP001 6549011600 / 6549021800

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E220d 2.0d, hardware number 6549011600 and software number 6549021800, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E220d 2.0d2.0 194.0PS / 142.7kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
6549011600
Software number
6549021800
Bosch part / software
10SW002559

Technical data

Vehicle
BrandMercedes-Benz
Car modelE220d 2.0d
Engine2.0 194.0PS / 142.7kW
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011600
Software number6549021800
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key0fe6de2d360a3940
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002559Offset in the file: 0x040144
Software / calibration6549021800Offset in the file: 0x48701F
Data set number6549032801Offset in the file: 0x733375
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_7035D///Offset in the file: 0x487030

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011600 and software number 6549021800. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
654901160010SW047385Mercedes-Benz C
654901160010SW047386Mercedes-Benz C220
654901160010SW068286Mercedes-Benz GLC
654901160010SW068289Mercedes-Benz GLC
65490116006549032204Mercedes-Benz E 200 D
65490116006549032304Mercedes-Benz E220 2.0d
65490116006549034806Mercedes-Benz E 220 D
65490116006549035401Mercedes-Benz E220d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page