Original file

Mercedes-Benz E200d 2.0d Bosch MD1CP001 6549011600 / 6549035702

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E200d 2.0d, hardware number 6549011600 and software number 6549035702, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E200d 2.0d2.0 150.0PS / 110.3kW
Control unit
Bosch MD1CP001
File size
7,680.00 KB
Contents
Flash
Hardware number
6549011600
Software number
6549035702
Bosch part / software
10SW035529

Technical data

Vehicle
BrandMercedes-Benz
Car modelE200d 2.0d
Engine2.0 150.0PS / 110.3kW
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011600
Software number6549035702
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File key7df4935045bf43e0
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW035529Offset in the file: 0x600144
Data set number6549035702Offset in the file: 0x71054F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x77FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011600 and software number 6549035702. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490116006549035401Mercedes-Benz E220d
65490116006549035600Mercedes-Benz E 220d
65490116006549035601Mercedes-Benz E 220d, Mercedes-Benz E220d 2.0d, Mercedes-Benz E 220 D
65490116006549035602Mercedes-Benz C 200d
65490116006549036901Mercedes-Benz Voor ALLCAR Tuning 2.0d
65490116006549037901Mercedes-Benz C 220d
65490118006549032804Mercedes-Benz CLS300 300d
65490122006549033105Mercedes-Benz V220d 2.0d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page