Original file

Mercedes-Benz CLS300 300d Bosch MD1CP001 6549011800 / 6549032804

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS300 300d, hardware number 6549011800 and software number 6549032804, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS300 300d245.0PS / 180.2kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
6549011800
Software number
6549032804
Bosch part / software
10SW032157
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS300 300d
Engine245.0PS / 180.2kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549011800
Software number6549032804
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key4a9c19c0b85ae6e7
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW032157Offset in the file: 0x040144
Software / calibration6549023600Offset in the file: 0x4D9DFF
Data set number6549032804Offset in the file: 0x75054F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x4D9E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549011800 and software number 6549032804. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490116006549035602Mercedes-Benz C 200d
65490116006549035702Mercedes-Benz E200d 2.0d
65490116006549036901Mercedes-Benz Voor ALLCAR Tuning 2.0d
65490116006549037901Mercedes-Benz C 220d
65490122006549033105Mercedes-Benz V220d 2.0d
65490122006549034405Mercedes-Benz Vito 119 CDI
65490122006549037406Mercedes-Benz Vito 2.0d
65490122006549037504Mercedes-Benz Vito 114 (2.0)

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page