Original file

Mercedes-Benz GLC350 2.0d Bosch MD1CP001 6549012200 / 6549039603

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLC350 2.0d, hardware number 6549012200 and software number 6549039603, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC350 2.0dOM654
Control unit
Bosch MD1CP001
File size
7,680.00 KB
Contents
Flash
Hardware number
6549012200
Software number
6549039603
Bosch part / software
10SW046306

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC350 2.0d
EngineOM654
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549012200
Software number6549039603
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File key3596cc5a162861fd
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW046306Offset in the file: 0x600144
Data set number6549039603Offset in the file: 0x71908F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x77FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549012200 and software number 6549039603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490122006549034405Mercedes-Benz Vito 119 CDI
65490122006549037406Mercedes-Benz Vito 2.0d
65490122006549037504Mercedes-Benz Vito 114 (2.0)
65490122006549037906Mercedes-Benz Vito 2.0d
654901260010SW049369Mercedes-Benz C
654901260010SW062840Mercedes-Benz E
654901620010SW087326Mercedes-Benz
654901620010SW088785Mercedes-Benz Unknown Unknown

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page