Original file

Mercedes-Benz E 220d Bosch MD1CP001 6549022500 / 6549035601

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E 220d, hardware number 6549022500 and software number 6549035601, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 220d194.0PS / 142.7kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
6549022500
Software number
6549035601
Bosch part / software
10SW021370

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 220d
Engine194.0PS / 142.7kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549022500
Software number6549035601
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key954b02df109da5cd
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW021370Offset in the file: 0x040144
Software / calibration6549022500Offset in the file: 0x489E67
Data set number6549035601Offset in the file: 0x732EF5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_7053D///Offset in the file: 0x489E78

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549022500 and software number 6549035601. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490211006549037700Mercedes-Benz E 200 D
65490219006549033501Mercedes-Benz E 200 d
65490225006549035201Mercedes-Benz E 200 d
65490225006549035401Mercedes-Benz E 220d
65490236006549032204Mercedes-Benz E 200 D
65490236006549035702Mercedes-Benz E 200 d
65490236006549037901Mercedes-Benz C 220 D
65490236006549038001Mercedes-Benz C 220d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page