Original file

Mercedes-Benz E 200 d Bosch MD1CP001 6549023600 / 6549035702

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E 200 d, hardware number 6549023600 and software number 6549035702, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 200 d150.0PS / 110.3kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
6549023600
Software number
6549035702
Bosch part / software
10SW032157

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 200 d
Engine150.0PS / 110.3kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549023600
Software number6549035702
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key0c8a68fc5d652ac2
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW032157Offset in the file: 0x040144
Software / calibration6549023600Offset in the file: 0x4D9DFF
Data set number6549035702Offset in the file: 0x75054F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x4D9E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549023600 and software number 6549035702. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490225006549035201Mercedes-Benz E 200 d
65490225006549035401Mercedes-Benz E 220d
65490225006549035601Mercedes-Benz E 220d
65490236006549032204Mercedes-Benz E 200 D
65490236006549037901Mercedes-Benz C 220 D
65490236006549038001Mercedes-Benz C 220d
65490241006549033105Mercedes-Benz V 220 D
65490252006549030504Mercedes-Benz GLC 220 d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page