Original file

Mercedes-Benz GLC 220 d Bosch MD1CP001 6549025200 / 6549030504

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLC 220 d, hardware number 6549025200 and software number 6549030504, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 220 d194.0PS / 142.7kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
6549025200
Software number
6549030504
Bosch part / software
10SW039898

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 220 d
Engine194.0PS / 142.7kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6549025200
Software number6549030504
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key7754233fb5f4251a
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW039898Offset in the file: 0x040144
Software / calibration6549025200Offset in the file: 0x4E0137
Data set number6549030504Offset in the file: 0x75908F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x4E0148

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6549025200 and software number 6549030504. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65490236006549035702Mercedes-Benz E 200 d
65490236006549037901Mercedes-Benz C 220 D
65490236006549038001Mercedes-Benz C 220d
65490241006549033105Mercedes-Benz V 220 D
65490277006549037707Mercedes-Benz GLE 350 de
65490277006549038007Mercedes-Benz GLC 300de
656901020010SW047157Mercedes-Benz GLS
656901020010SW047163Mercedes-Benz E-Class

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page