Original file

Mercedes-Benz CLS 350 Bosch MD1CP001 CRI325-EU6SCR_MPE-F-ME180600B / 10SW034792

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS 350, hardware number CRI325-EU6SCR_MPE-F-ME180600B and software number 10SW034792, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS 350
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
CRI325-EU6SCR_MPE-F-ME180600B
Software number
10SW034792

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS 350
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberCRI325-EU6SCR_MPE-F-ME180600B
Software number10SW034792
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc9719da3ca9149d6
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW034792Offset in the file: 0x000144
Data set number6549034502Offset in the file: 0x10BCDF
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_9060D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRI325-EU6SCR_MPE-F-ME180600B and software number 10SW034792. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65690115006569037203Mercedes-Benz GLE 350 D
65690115006569038402Mercedes-Benz CLS400d 3.0d
65690119006569034503Mercedes-Benz G 400 D
656903390110SW054911Mercedes-Benz GLE / GLE Coupé
CRI325-EU6SCR_MPE-F-ME18150010SW032157Mercedes-Benz C300d
CRI325-EU6SCR_MPE-F-ME18500010SW032157Mercedes-Benz CLS
CRI325-EU6SCR_MPE-F-ME18500010SW048090Mercedes-Benz E300
CRI325-EU6SCR_MPE-F-ME19090010SW040541Mercedes-Benz GLE

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page