Original file

Mercedes-Benz C300d Bosch MD1CP001 CRI325-EU6SCR_MPE-F-ME181500 / 10SW032157

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz C300d, hardware number CRI325-EU6SCR_MPE-F-ME181500 and software number 10SW032157, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C300d2.0 240PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
CRI325-EU6SCR_MPE-F-ME181500
Software number
10SW032157
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelC300d
Engine2.0 240PS
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberCRI325-EU6SCR_MPE-F-ME181500
Software number10SW032157
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key7d994220250e1052
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW032157Offset in the file: 0x040144
Software / calibration6549023600Offset in the file: 0x4D9DFF
Data set number6549036302Offset in the file: 0x75054F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x4D9E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRI325-EU6SCR_MPE-F-ME181500 and software number 10SW032157. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
65690115006569038402Mercedes-Benz CLS400d 3.0d
65690119006569034503Mercedes-Benz G 400 D
656903390110SW054911Mercedes-Benz GLE / GLE Coupé
CRI325-EU6SCR_MPE-F-ME180600B10SW034792Mercedes-Benz CLS 350
CRI325-EU6SCR_MPE-F-ME18500010SW032157Mercedes-Benz CLS
CRI325-EU6SCR_MPE-F-ME18500010SW048090Mercedes-Benz E300
CRI325-EU6SCR_MPE-F-ME19090010SW040541Mercedes-Benz GLE
CRI325-EU6SCR_MPE-F-ME21420010SW086979Mercedes-Benz

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page