Original file

Mercedes-Benz GLE Bosch MD1CP001 CRI325-EU6SCR_MPE-F-ME190900 / 10SW040541

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLE, hardware number CRI325-EU6SCR_MPE-F-ME190900 and software number 10SW040541, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE3.0 diesel 245PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
CRI325-EU6SCR_MPE-F-ME190900
Software number
10SW040541
Software / calibration
6549025400

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE
Engine3.0 diesel 245PS
Power245.0PS / 180.2kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberCRI325-EU6SCR_MPE-F-ME190900
Software number10SW040541
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyf48ab6f340ebc652
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW040541Offset in the file: 0x040144
Software / calibration6549025400Offset in the file: 0x4DEC77
Data set number6549034204Offset in the file: 0x758B57
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B041D///Offset in the file: 0x4DEC88

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRI325-EU6SCR_MPE-F-ME190900 and software number 10SW040541. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page