Original file
Mercedes-Benz GLC Bosch MD1CP001 CRI325-EU6SCR_MPE-F-ME214500 / 10SW054910
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLC, hardware number CRI325-EU6SCR_MPE-F-ME214500 and software number 10SW054910, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLC2.0 diesel 245PS
- Control unit
- Bosch MD1CP001
- File size
- 8,192.00 KB
- Contents
- Flash
- Hardware number
- CRI325-EU6SCR_MPE-F-ME214500
- Software number
- 10SW054910
- Software / calibration
- 6549027600
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLC |
| Engine | 2.0 diesel 245PS |
| Power | 245PS / 180.2kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CRI325-EU6SCR_MPE-F-ME214500 |
| Software number | 10SW054910 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | fe57feaab5cccd83 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW054910 | Offset in the file: 0x040144 |
| Software / calibration | 6549027600 | Offset in the file: 0x4E0497 |
| Data set number | 6549033812 | Offset in the file: 0x759297 |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B082D/// | Offset in the file: 0x4E04A8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CRI325-EU6SCR_MPE-F-ME214500 and software number 10SW054910. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| CRI325-EU6SCR_MPE-F-ME185000 | 10SW048090 | Mercedes-Benz E300 |
| CRI325-EU6SCR_MPE-F-ME190900 | 10SW040541 | Mercedes-Benz GLE |
| CRI325-EU6SCR_MPE-F-ME214200 | 10SW086979 | Mercedes-Benz |
| CRI325-EU6SCR_MPE-F-ME214400 | 10SW088206 | Mercedes-Benz |
| CRI325-EU6SCR_MPE-F-ME3_183700 | 6549011500 | Mercedes-Benz GLE300 |
| EU6SCR_MPE-F-ME214300 | 10SW087960 | Mercedes-Benz E |
| MDG1D_0M_9050D | MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250 | Mercedes-Benz CLS400D |
| MRD1-15A-0M_5060D-213-WA-OM654D20_110 | 6549011600 | Mercedes-Benz E200d, Mercedes-Benz E200 |