Original file
Mercedes-Benz CLS400D Bosch MD1CP001 MDG1D_0M_9050D / MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz CLS400D, hardware number MDG1D_0M_9050D and software number MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLS400D340PS
- Control unit
- Bosch MD1CP001
- File size
- 7,680.00 KB
- Contents
- Flash
- Hardware number
- MDG1D_0M_9050D
- Software number
- MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250
- Bosch part / software
- 10SW029842
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLS400D |
| Engine | 340PS |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 340.0PS / 250.1kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MDG1D_0M_9050D |
| Software number | MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | 44d4671e375b7c53 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW029842 | Offset in the file: 0x600144 |
| Data set number | 6569035000 | Offset in the file: 0x70BCDF |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_9050D/// | Offset in the file: 0x77FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MDG1D_0M_9050D and software number MRD1-17A-0M_9050D-213_238_257-WAX-OM656D29_250. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| CRI325-EU6SCR_MPE-F-ME214400 | 10SW088206 | Mercedes-Benz |
| CRI325-EU6SCR_MPE-F-ME214500 | 10SW054910 | Mercedes-Benz GLC |
| CRI325-EU6SCR_MPE-F-ME3_183700 | 6549011500 | Mercedes-Benz GLE300 |
| EU6SCR_MPE-F-ME214300 | 10SW087960 | Mercedes-Benz E |
| MRD1-15A-0M_5060D-213-WA-OM654D20_110 | 6549011600 | Mercedes-Benz E200d, Mercedes-Benz E200 |
| MRD1-15A-0M_5060D-213-WA-OM654D20_120 | 6549011600 | Mercedes-Benz E220d |
| MRD1-15A-0M_5060D-213-WA-OM654D20_140 | 6549011600 | Mercedes-Benz E220d |
| MRD1-16A-0M_7035D-213_238-WA-OM654D20_110 | 6549011600 | Mercedes-Benz E200d, Mercedes-Benz C200d |