Original file

Bosch MD1CP001 MRD1-16A-0M_7053D-213_238-WA-OM654D20_143 / 021375

An original (stock) flash read of the Bosch MD1CP001 control unit, hardware number MRD1-16A-0M_7053D-213_238-WA-OM654D20_143 and software number 021375, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
MRD1-16A-0M_7053D-213_238-WA-OM654D20_143
Software number
021375
Bosch part / software
10SW021375
Software / calibration
DA_MDG1D_0M_7053D

Technical data

Vehicle
Engine0.0
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberMRD1-16A-0M_7053D-213_238-WA-OM654D20_143
Software number021375
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6af288e3985950bc
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW021375Offset in the file: 0x000144
Software / calibrationDA_MDG1D_0M_7053DOffset in the file: 0x17FA7C
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_7053D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MRD1-16A-0M_7053D-213_238-WA-OM654D20_143 and software number 021375. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page