Original file

Mercedes-Benz S400 Bosch MD1CP001 MRD1-16B-0M_8051D-222-WAX-OM656D29_250 / 10SW029530

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz S400, hardware number MRD1-16B-0M_8051D-222-WAX-OM656D29_250 and software number 10SW029530, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S4003.0 diesel 340PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
MRD1-16B-0M_8051D-222-WAX-OM656D29_250
Software number
10SW029530

Technical data

Vehicle
BrandMercedes-Benz
Car modelS400
Engine3.0 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberMRD1-16B-0M_8051D-222-WAX-OM656D29_250
Software number10SW029530
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf703d201d4c5cb0f
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW029530Offset in the file: 0x000144
Data set number6569035800Offset in the file: 0x0FDD85
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_8051D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MRD1-16B-0M_8051D-222-WAX-OM656D29_250 and software number 10SW029530. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page