Original file
Mercedes-Benz E200d Bosch MD1CP001 MRD1-17B-0M_A090D-213_238-WA-OM654D16_118 / 10SW087449
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E200d, hardware number MRD1-17B-0M_A090D-213_238-WA-OM654D16_118 and software number 10SW087449, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E200dOM654 · 160.0PS / 117.7kW
- Control unit
- Bosch MD1CP001
- File size
- 7,680.00 KB
- Contents
- Flash
- Hardware number
- MRD1-17B-0M_A090D-213_238-WA-OM654D16_118
- Software number
- 10SW087449
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E200d |
| Engine | OM654 |
| Fuel | Diesel |
| Displacement | 1.6 |
| Power | 160.0PS / 117.7kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MRD1-17B-0M_A090D-213_238-WA-OM654D16_118 |
| Software number | 10SW087449 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | ecc0da09c92118c5 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW087449 | Offset in the file: 0x600144 |
| Data set number | 6549035907 | Offset in the file: 0x7107EB |
| Bosch project identifier (EPK) | 246/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A090D/// | Offset in the file: 0x77FA7B |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MRD1-17B-0M_A090D-213_238-WA-OM654D16_118 and software number 10SW087449. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| MRD1-17B-0M_A090D-205-WA-OM654D20_143 | 10SW086976 | Mercedes-Benz C |
| MRD1-17B-0M_A090D-205-WA-OM654D20_180 | 6549016300 | Mercedes-Benz C300d |
| MRD1-17B-0M_A090D-205-WAX-OM654D20_143 | 6549016200 | Mercedes-Benz C220d |
| MRD1-17B-0M_A090D-205-WM-OM654D16_90 | 10SW086970 | Mercedes-Benz C180d |
| MRD1-17B-0M_A090D-213_238-WA-OM654D16_118 | 6549011600 | Mercedes-Benz E200d |
| MRD1-17B-0M_A090D-213_238_257-WA-OM654D20_143 | 6549016200 | Mercedes-Benz E220 |
| MRD1-17B-0M_A091D-213_238_257-WAX-OM656D29_250 | 6569011500 | Mercedes-Benz CLS400d |
| MRD1-17B-0M_A091D-222-WAX-OM656D29_250 | 6569011500 | Mercedes-Benz S400d |