Original file
Mercedes-Benz GLS350 Bosch MD1CP001 MRD1-18A-0M_B070D-167-WAX-OM656D29_210 / 6569010200
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLS350, hardware number MRD1-18A-0M_B070D-167-WAX-OM656D29_210 and software number 6569010200, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLS3503.0 diesel · 286.0PS / 210.4kW
- Control unit
- Bosch MD1CP001
- File size
- 7,680.00 KB
- Contents
- Flash
- Hardware number
- MRD1-18A-0M_B070D-167-WAX-OM656D29_210
- Software number
- 6569010200
- Bosch part / software
- 10SW047157
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLS350 |
| Engine | 3.0 diesel |
| Power | 286.0PS / 210.4kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MRD1-18A-0M_B070D-167-WAX-OM656D29_210 |
| Software number | 6569010200 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | ec1ee6f59814fbf0 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW047157 | Offset in the file: 0x600144 |
| Data set number | 6569032401 | Offset in the file: 0x71908F |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D/// | Offset in the file: 0x77FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MRD1-18A-0M_B070D-167-WAX-OM656D29_210 and software number 6569010200. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| MRD1-18A-0M_B052D-213_238_257-WA-OM654D20_P290_143 | 6549012600 | Mercedes-Benz E300d, Mercedes-Benz E300e |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_200 | 6549025200 | Mercedes-Benz GLE350d |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_200 | 6569010200 | Mercedes-Benz GLE350d |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_200 | 6569011500 | Mercedes-Benz GLE350d |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_243 | 10SW047128 | Mercedes-Benz GLE400 |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_243 | 6549025200 | Mercedes-Benz G350 |
| MRD1-18A-0M_B070D-167-WAX-OM656D29_243 | 6569010200 | Mercedes-Benz GLS400d |
| MRD1-18A-0M_B070D-253-WA-OM654D20_120 | 6549011600 | Mercedes-Benz GLC200d |