Original file
Mercedes-Benz GLB180d SHIFTECH Bosch MD1CP001 MRD1-18B-0M_C071D-MFA2_H / 6549012600
An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLB180d SHIFTECH, hardware number MRD1-18B-0M_C071D-MFA2_H and software number 6549012600, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLB180d SHIFTECHOM654 · 116.0PS / 85.3kW
- Control unit
- Bosch MD1CP001
- File size
- 2,048.00 KB
- Contents
- Flash
- Hardware number
- MRD1-18B-0M_C071D-MFA2_H
- Software number
- 6549012600
- Bosch part / software
- 10SW051867
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLB180d SHIFTECH |
| Engine | OM654 |
| Fuel | Diesel |
| Displacement | 2.0 |
| Power | 116.0PS / 85.3kW |
| Control unit | Bosch MD1CP001 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MRD1-18B-0M_C071D-MFA2_H |
| Software number | 6549012600 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | d549c54a9ec7ec52 |
| ECU name | MD1CP001 | |
|---|---|---|
| Bosch part / software | 10SW051867 | Offset in the file: 0x000144 |
| Data set number | 6549030805 | Offset in the file: 0x11906B |
| Bosch project identifier (EPK) | 46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C071D/// | Offset in the file: 0x17FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MRD1-18B-0M_C071D-MFA2_H and software number 6549012600. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CP001
| Hardware | Software | Vehicles |
|---|---|---|
| MRD1-18B-0M_C060D-447-WA-OM654D20_176 | 6549012200 | Mercedes-Benz Viano |
| MRD1-18B-0M_C060D-447-WAX-OM654D20_176 | 10SW050472 | Mercedes-Benz Viano |
| MRD1-18B-0M_C060D-447-WAX-OM654D20_176 | 6549012200 | Mercedes-Benz V300d |
| MRD1-18B-0M_C071D-253M-WAX-OM656D29_243 | 6569010900 | Mercedes-Benz GLC400d BR PERFORMANCE |
| MRD1-18B-0M_C071D-MFA2_Hoch-DCT-OM654D20q_85kW-EU6-ME191900 | 10SW050053 | Mercedes-Benz GLB |
| MRD1-18B-0M_C072D-253M-WAX-OM656D29_243 | 6569011500 | Mercedes-Benz GLC400d |
| MRD1-18B-0M_C072D-447-WA-OM654D20_100 | 6549012200 | Mercedes-Benz Vito, Mercedes-Benz Vito 114 |
| MRD1-18B-0M_C072D-447-WA-OM654D20_120 | 056908 | Mercedes-Benz V-classe |