Original file

Mercedes-Benz GLC400d Bosch MD1CP001 MRD1-18B-0M_C072D-253M-WAX-OM656D29_243 / 6569011500

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLC400d, hardware number MRD1-18B-0M_C072D-253M-WAX-OM656D29_243 and software number 6569011500, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC400d3.0 340PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
MRD1-18B-0M_C072D-253M-WAX-OM656D29_243
Software number
6569011500
Bosch part / software
10SW087599

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC400d
Engine3.0 340PS
FuelDiesel
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberMRD1-18B-0M_C072D-253M-WAX-OM656D29_243
Software number6569011500
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key58b4a839fc6e7507
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW087599Offset in the file: 0x000144
Data set number6569036003Offset in the file: 0x11906B
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C072D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MRD1-18B-0M_C072D-253M-WAX-OM656D29_243 and software number 6569011500. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page