Original file

Mercedes-Benz GLB Bosch MD1CP001 MRD1-18B-0M_C072D-MFA2_Hoch-DCT-OM654D20q_110kW-EU6-ME193300 / 10SW053619

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLB, hardware number MRD1-18B-0M_C072D-MFA2_Hoch-DCT-OM654D20q_110kW-EU6-ME193300 and software number 10SW053619, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLBdiesel 149PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
MRD1-18B-0M_C072D-MFA2_Hoch-DCT-OM654D20q_110kW-EU6-ME193300
Software number
10SW053619
Software / calibration
6549027500

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLB
Enginediesel 149PS
Displacement2.0
Power149.6PS / 110.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware numberMRD1-18B-0M_C072D-MFA2_Hoch-DCT-OM654D20q_110kW-EU6-ME193300
Software number10SW053619
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyd43143a20d03dec5
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW053619Offset in the file: 0x040144
Software / calibration6549027500Offset in the file: 0x4E262F
Data set number6549030905Offset in the file: 0x75906B
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C072D///Offset in the file: 0x4E2640

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MRD1-18B-0M_C072D-MFA2_Hoch-DCT-OM654D20q_110kW-EU6-ME193300 and software number 10SW053619. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
MRD1-18B-0M_C072D-447-WAX-OM654D20_1766549012200Mercedes-Benz V300d, Mercedes-Benz Vito
MRD1-18B-0M_C072D-MFA2_C10SW067701Mercedes-Benz CLA220d
MRD1-18B-0M_C072D-MFA2_C6549012600Mercedes-Benz A200d, Mercedes-Benz CLA200d
MRD1-18B-0M_C072D-MFA2_H6549012600Mercedes-Benz GLB200d
MRD1-19A-0M_D050D-167-WAX-OM654D20_P290_1436549012600Mercedes-Benz GLE350de, Mercedes-Benz GLE350d
MRD1-19A-0M_D060D-167-WAX-OM654D20_P290_143062838Mercedes-Benz GLE350de
MRD1-19A-0M_D060D-167-WAX-OM654D20_P290_1436549012600Mercedes-Benz GLE350d
MRD1-19A-0M_D060D-213M238M257M-WA-OM654D20_P290_1410SW062840Mercedes-Benz E300d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page