Original file

BMW 7er 30d Bosch MD1CP002 00004C5E_023_017_004 / O_8KWH0-00004C5E-004

An original (stock) flash read of the Bosch MD1CP002 control unit, fitted in BMW 7er 30d, hardware number 00004C5E_023_017_004 and software number O_8KWH0-00004C5E-004, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 7er 30dpetrol 265.0PS / 194.9kW
Control unit
Bosch MD1CP002
File size
16,384.00 KB
Contents
Flash
Hardware number
00004C5E_023_017_004
Software number
O_8KWH0-00004C5E-004
Bosch part / software
10SW032152

Technical data

Vehicle
BrandBMW
Car model7er 30d
Enginepetrol 265.0PS / 194.9kW
FuelDiesel
Displacement3.0
Control unit
Control unitBosch MD1CP002
ECU makerBosch
Hardware number00004C5E_023_017_004
Software numberO_8KWH0-00004C5E-004
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File keyd845c4c4fb9cf154
Identification read from the file
ECU nameMD1CP002
Bosch part / software10SW032152Offset in the file: 0x080164
Bosch project identifier (EPK)38/1/MDG1_MD1CP002/11/P_1289//VKWH0///Offset in the file: 0x111A08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00004C5E_023_017_004 and software number O_8KWH0-00004C5E-004. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP002

Bosch MD1CP002 original files

The Bosch MD1CP002 unit page