Original file

BMW 8 Serie 40D Bosch MD1CP002 - / O_8KWN0-00005473-005

An original (stock) flash read of the Bosch MD1CP002 control unit, fitted in BMW 8 Serie 40D, hardware number - and software number O_8KWN0-00005473-005, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 8 Serie 40D319.5PS / 235.0kW
Control unit
Bosch MD1CP002
File size
16,384.00 KB
Contents
Flash
Hardware number
-
Software number
O_8KWN0-00005473-005
Bosch part / software
10SW039960

Technical data

Vehicle
BrandBMW
Car model8 Serie 40D
Engine319.5PS / 235.0kW
FuelDiesel
Displacement3.0
Control unit
Control unitBosch MD1CP002
ECU makerBosch
Hardware number-
Software numberO_8KWN0-00005473-005
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File key0bcb16671f0e157b
Identification read from the file
ECU nameMD1CP002
Bosch part / software10SW039960Offset in the file: 0x080164
Data set descriptionB57D30T0-G15B57T0_AWR1_AT
Bosch project identifier (EPK)38/1/MDG1_MD1CP002/11/P_1289//VKWN0///Offset in the file: 0x111A58

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number - and software number O_8KWN0-00005473-005. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP002

Bosch MD1CP002 original files

The Bosch MD1CP002 unit page