Original file

BMW X5 SUV Bosch MD1CP032 0281036872 / 10SW051899

An original (stock) flash read of the Bosch MD1CP032 control unit, fitted in BMW X5 SUV, hardware number 0281036872 and software number 10SW051899, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUVpetrol
Control unit
Bosch MD1CP032
File size
8,192.00 KB
Contents
Flash
Hardware number
0281036872
Software number
10SW051899

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
Enginepetrol
FuelDiesel
Displacement2.0
Control unit
Control unitBosch MD1CP032
ECU makerBosch
Hardware number0281036872
Software number10SW051899
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key7fc75551b2013caa
Identification read from the file
ECU nameMD1CP032
Bosch part / software10SW051899Offset in the file: 0x010144
Data set descriptionB47D20T1-G05B47T1_AWR1_A
Bosch project identifier (EPK)38/1/MDG1_MD1CP032/11/P_1659//VOJP0///Offset in the file: 0x626140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP032 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281036872 and software number 10SW051899. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP032

Bosch MD1CP032 original files

The Bosch MD1CP032 unit page