Original file

BMW 5er Bosch MD1CS001 O_8LUA2-000046DA-052 / 10SW002443

An original (stock) flash read of the Bosch MD1CS001 control unit, fitted in BMW 5er, hardware number O_8LUA2-000046DA-052 and software number 10SW002443, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er2.0 diesel 190PS
Control unit
Bosch MD1CS001
File size
7,936.00 KB
Contents
Flash
Hardware number
O_8LUA2-000046DA-052
Software number
10SW002443

Technical data

Vehicle
BrandBMW
Car model5er
Engine2.0 diesel 190PS
Power190.0PS / 139.7kW
Control unit
Control unitBosch MD1CS001
ECU makerBosch
Hardware numberO_8LUA2-000046DA-052
Software number10SW002443
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File key87c347593906f5bf
Identification read from the file
ECU nameMD1CS001
Bosch part / software10SW002443Offset in the file: 0x000164
Data set descriptionB47D20O0-G30B47O0_2W6_AT
Bosch project identifier (EPK)38/1/MDG1_MD1CS001/11/P_1401//VLUA2///Offset in the file: 0x08D760

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8LUA2-000046DA-052 and software number 10SW002443. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS001

Bosch MD1CS001 original files

The Bosch MD1CS001 unit page