Original file

Citroën C5 Air Cross 1.5D Bosch MD1CS003 0281035366 / 10SW041331

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën C5 Air Cross 1.5D, hardware number 0281035366 and software number 10SW041331, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën C5 Air Cross 1.5D1.5
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
0281035366
Software number
10SW041331
Vehicle maker's hardware number
9693561980
Software / calibration
62Q3H_PSO8B_6A6O8_9693561980

Technical data

Vehicle
BrandCitroën
Car modelC5 Air Cross 1.5D
Engine1.5
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number0281035366
Software number10SW041331
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameCitroen C5 Air Cross MD1CS003
File keyf4c5c913bfbcdb00
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041331Offset in the file: 0x200144
Vehicle maker's hardware number9693561980Offset in the file: 0x600256
Software / calibration62Q3H_PSO8B_6A6O8_9693561980Offset in the file: 0x600228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C66/62Q3H_PSO8B_6A6O8_9693561980//Offset in the file: 0x600228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281035366 and software number 10SW041331. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
90331333Opel Combo, Opel Corsa
003014139610SW034515Peugeot Expert
00301413962227770000Opel Vivaro
00301413962227773333Peugeot 508
02810353662227773333Peugeot Partner
046006121610SW041437
0900150432041437Citroën Berlingo SHIFTECH MAPKE
0900150451041437Citroën Berlingo

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page