Original file

Opel Grandland Bosch MD1CS003 62Q2V_PUU8B_6A6O3_9693197880 / 2227773333

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Opel Grandland, hardware number 62Q2V_PUU8B_6A6O3_9693197880 and software number 2227773333, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Grandland1.5 diesel 130PS
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
62Q2V_PUU8B_6A6O3_9693197880
Software number
2227773333
Bosch part / software
10SW034704
Vehicle maker's hardware number
9693197880

Technical data

Vehicle
BrandOpel
Car modelGrandland
Engine1.5 diesel 130PS
Power130PS / 95.6kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number62Q2V_PUU8B_6A6O3_9693197880
Software number2227773333
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyd43853f312b8db9b
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW034704Offset in the file: 0x200144
Vehicle maker's hardware number9693197880Offset in the file: 0x600256
Software / calibration62Q2V_PUU8B_6A6O3_9693197880Offset in the file: 0x600228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C47/62Q2V_PUU8B_6A6O3_9693197880//Offset in the file: 0x600228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 62Q2V_PUU8B_6A6O3_9693197880 and software number 2227773333. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page