Original file

Opel Combo Bosch MD1CS003 62R2I_P5E8B_7A3OF_9697261080 / 12335555

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Opel Combo, hardware number 62R2I_P5E8B_7A3OF_9697261080 and software number 12335555, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Combo1.5 diesel 102PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
62R2I_P5E8B_7A3OF_9697261080
Software number
12335555
Bosch part / software
10SW105543
Vehicle maker's hardware number
9697261080

Technical data

Vehicle
BrandOpel
Car modelCombo
Engine1.5 diesel 102PS
Power102.0PS / 75.0kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number62R2I_P5E8B_7A3OF_9697261080
Software number12335555
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1f70c0fae9bbb5b8
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW105543Offset in the file: 0x000144
Vehicle maker's hardware number9697261080Offset in the file: 0x000256
Software / calibration62R2I_P5E8B_7A3OF_9697261080Offset in the file: 0x000228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C70/62R2I_P5E8B_7A3OF_9697261080//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 62R2I_P5E8B_7A3OF_9697261080 and software number 12335555. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page