Original file

Opel Combo Bosch MD1CS003 62S2X_P5E8B_6A3O4_9693682280 / 90331333

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Opel Combo, hardware number 62S2X_P5E8B_6A3O4_9693682280 and software number 90331333, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Combo1.5 diesel 75PS
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
62S2X_P5E8B_6A3O4_9693682280
Software number
90331333
Bosch part / software
10SW041437
Vehicle maker's hardware number
9693682280
Software / calibration
P1396_PSA_MD1CS003_IFXD4_C48B

Technical data

Vehicle
BrandOpel
Car modelCombo
Engine1.5 diesel 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number62S2X_P5E8B_6A3O4_9693682280
Software number90331333
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key871b1897f2680a1e
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041437Offset in the file: 0x000164
Vehicle maker's hardware number9693682280Offset in the file: 0x600257
Software / calibrationP1396_PSA_MD1CS003_IFXD4_C48BOffset in the file: 0x21F3A8
Bosch project identifier (EPK)58/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C48B///Offset in the file: 0x21F3A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 62S2X_P5E8B_6A3O4_9693682280 and software number 90331333. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page