Original file

Peugeot 208 Bosch MD1CS003 9693166480 / 034515

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot 208, hardware number 9693166480 and software number 034515, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 2081.5 · 100.0PS / 73.5kW
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9693166480
Software number
034515
Bosch part / software
10SW034515
Software / calibration
62R2U_1LH8B_5A3O9_9693166480

Technical data

Vehicle
BrandPeugeot
Car model208
Engine1.5
FuelDiesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693166480
Software number034515
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key15ae1dcfe20e35ba
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW034515Offset in the file: 0x000144
Vehicle maker's hardware number9693166480Offset in the file: 0x000257
Software / calibration62R2U_1LH8B_5A3O9_9693166480Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C46b/62R2U_1LH8B_5A3O9_9693166480//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693166480 and software number 034515. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96930621802227773333Peugeot 5008, Peugeot 3008
96930624802227773333Peugeot 308
96930816802227770000Citroën DS7
969311148010SW029072Citroën C3
969316648010SW034515Peugeot 208
96931790802227773333Peugeot 3008, Peugeot C4, Peugeot 5008
96931791802227773333Peugeot 308
96931974802227770000Peugeot 308, Peugeot PHASE II, Peugeot 3008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page